Material behaviour
Does heat affect the material or the next operation? Does the specification call for a particular cutting process?
02 / WATERJET CUTTING
Waterjet cutting up to 200 mm thick in any material, with a 4000 × 2000 mm working bed.
CHOOSE THE PROCESS FOR THE PART
Waterjet uses a high-pressure jet, with abrasive for metal cutting, to separate the material. The process avoids a thermal heat-affected zone at the cut.
It can be a useful route for specialist alloys, heat-sensitive components and work that needs a different approach from laser cutting. Edge finish, taper and dimensional requirements still need to be reviewed for each job.
Enquire about waterjet cuttingWATERJET CAPACITY
Send the material specification and drawing so we can review the geometry, tolerances and edge-finish requirements.
We cut the circular opening and outer profile of the part shown from 60 mm thick grade 316 stainless steel plate. Our Flow IFB waterjet uses an abrasive jet to cut the profile without creating a heat-affected zone at the edge.
We stock 304, 316 and 430 stainless steel. If you need a thick blank for machining, mark the faces that will be machined and specify the allowance. For sheet profiles, identify the smallest openings and any edge that will remain visible.
Our bed takes material up to 4,000 × 2,000 mm, with cutting capacity up to 200 mm thick. Send the grade, thickness, quantity and drawing so we can check the features and edge finish for your part.
Request a waterjet quote ↗
LASER OR WATERJET?
You don’t need to select a process before contacting us. These are the questions we’ll work through with you.
Does heat affect the material or the next operation? Does the specification call for a particular cutting process?
What are the smallest features, critical dimensions and section thickness? What edge condition is required?
What quantity is needed, when is it required, and what happens to the part after cutting?
LET’S MAKE IT
Send the material, quantity and required date. We’ll review the process and the next steps with you.